| Angle
|
Positive <angle value>
- Sets angle
between wye side branches.
|
| Branch | Connection Length
|
Positive <numeric value>
- Sets the straight
length at End3.
- Sets length of
threaded portion at End3.
|
| Branch Straight Length
|
Positive <numeric
value>
- Controls the
straight length before the branch connection length.
- Default
0.
|
| Branch | Outer Diameter
|
Positive <numeric value>
- Side branch
(End3) outside diameter.
|
| Branch Radius
|
Positive <numeric value>
- Sets center line
radii for wye side branches.
|
| Center to Inlet Distance
|
Positive <numeric value>
- Sets distance
between the End1 connect point and End2 center line.
|
| Center to Branch Distance
|
Positive <numeric value>
- Sets distance
between main branch center line (End1 and End2) and side branch's (End3) male
connection.
|
| Center to Inlet Distance
|
Positive <numeric value>
- Sets distance
between End1 connect point and End2 center line.
|
| Connection | End Type
|
fl
-<numeric value>
- Sets and sizes
end with a flange connection.
m
-<numeric value>
- Sets and sizes
end with a male connection.
fe
-<numeric value>
- Sets and sizes
end with a female connection.
Separate End Type entries for each End Spec with a semi
colon.
Example: fl-2;fe-.13 creates a flange at End1
with size 2, and a female connection at End2 with an overall reduction of
component's dimensions of .13
|
| Inlet | Length
|
Positive <numeric value>
- Sets the straight
length at End1.
- Sets length of
threaded portion at End1.
|
| Inlet | Outer Diameter
|
Positive <numeric value>
|
| Length (L)
|
Positive <numeric value>
- Sets distance
between the End1 and End3 connect points.
|
| Outlet | Length
|
Positive <numeric value>
- Sets the straight
length at End2.
- Sets length of
threaded portion at EndSpec2.
|
| Outlet | Outer Diameter
Outlet 1 | Outer Diameter
|
Positive <numeric value>
- Reduced branch
outside diameter.
|
| Standard Angle
|
<angle value> between 5° and 90°
- Closest catalog
match for angle property. Set by Manufacturer Catalogs.
|
| Total Length
|
Positive <numeric value>
- Sets overall
length of fitting.
|
